This is a ceramic integrated module, a high-performance UHF RFID reader/writer module developed based on the new generation RF chip E310 of IMPINJ. The output power can be set from 5dBm to 33dBm (China frequency band), the tag reading distance is greater than 4 meters, and it has excellent multi-tag inventory performance. The module has high power, low power consumption, stable and reliable, and adopts advanced multi-tag recognition algorithm.UHF RFID Tags can be quickly recognized in moving or stationary states.
Introduction
This is a ceramic integrated module, a high-performance UHF RFID reader/writer module developed based on the new generation RF chip E310 of IMPINJ. The output power can be set from 5dBm to 33dBm (China frequency band), the tag reading distance is greater than 4 meters, and it has excellent multi-tag inventory performance. The module has high power, low power consumption, stable and reliable, and adopts advanced multi-tag recognition algorithm.UHF RFID Tags can be quickly recognized in moving or stationary states.
The superior anti-interference design and carrier offset function of RFID reader module can work stably in various environments. A variety of configuration modes can be widely used in various applications such as warehousing, logistics, production lines, inspections, etc.
Features
ARMv7-M architecture 32bit Cortex-M4 CPU, integrated FPU, MPU, DSP, maximum working frequency 200MHz, 512KByte Flash
1, Support UHF EPC Class1 Gen2/ISO 18000-6C
2, Provide Windows, Linux, Android SDK, and API based on C, C#/.NET, JAVA
3, Support temperature tag inventory, output parameters can include RSSI and phase value of tag return signal
4, Built-in 2.5dBi ceramic antenna
5, Maximum 30dBm or 33dBm power output
6, Excellent anti-collision algorithm, high sensitivity, inventory tag speed greater than 350tag/s
7, Two communication interfaces, providing wider motherboard compatibility
8, UART serial port communication baud rate can be set from 9600bps to 921600bps
9, Two input and two output GPIO ports
10, Full power 30dBm in North American and European bands, power consumption 5W
11, Full power 33dBm in Chinese band, power consumption 6.5W
12, Weight 39.2g, size 45.5mm x 45.5mm x 9.3mm
|
12PIN Connectors |
|||
|
Pin Number |
Pin Name |
Type |
Description |
|
1 |
VCC |
Power supply |
Supply voltage, 3.6V-5V input |
|
2 |
VCC |
Power supply |
Supply voltage, 3.6V-5V input |
|
3 |
GND |
Power supply |
Grounding |
|
4 |
GND |
Power supply |
Grounding |
|
5 |
EN |
Digital input |
Module enable pin, connect high level to enable the module, connect low level or leave it unconnected to power off the module |
|
6 |
OUT2 |
Digital I/O |
General I/O port output, push-pull output |
|
7 |
IN1 |
Digital I/O |
General I/O port input |
|
8 |
IN2 |
Digital I/O |
General I/O port input |
|
9 |
RXD |
Digital input |
Module UART input, 3.3V level |
|
10 |
TXD |
Digital output |
Module UART output, 3.3V level |
|
11 |
NRST |
Digital input |
Module reset, low level resets the module, can be left unconnected when not in use |
|
12 |
OUT1 |
Digital I/O |
General I/O port output, push-pull output |
|
5PIN Connector（Option） |
|||
|
Pin Number |
Pin Name |
Type |
Description |
|
1 |
GND |
Power |
Grounding |
|
2 |
EN |
Digital input |
Module enable pin, connect high level to enable the module, connect low level or leave it unconnected to power off the module |
|
3 |
RXD |
Digital input |
Module UART input, 3.3V level |
|
4 |
TXD |
Digital output |
Module UART output, 3.3V level |
|
5 |
VCC |
Power |
Supply voltage, 3.6V-5V input |
*Interface FFC/FPC connector: Pitch 1mm Number of P: 12P Drawer type Bottom connection
*Interface harness connector: Pitch 1.25mm Number of P: 5P Horizontal attachment
